PRODUCTS · STATIONARY OIL MIST FILTERS
Stationary Oil Mist Filters – Clean air around CNC machining processes
Stationary oil mist filters capture oil mist, emulsion aerosols, lubricant particles and smoke generated during CNC machining and other metalworking processes. Installed directly on or beside the machine, they help control airborne contamination close to the source while supporting cleaner working conditions and reliable machine operation.
2 product ranges
FOM and Technomatic
Up to 5,000 m³/h
airflow capacity
ABOUT OIL MIST FILTRATION
What are oil mist filters and when should you use them?
Oil mist filters are designed to remove fine droplets, aerosols and smoke generated when cutting fluids, lubricants and emulsions are used during machining. These contaminants can escape from CNC machines and spread into the surrounding production area if they are not captured effectively. Stationary oil mist filters are normally connected directly to the machine enclosure by flexible ducting. Contaminated air passes through several filtration stages, where liquid droplets and fine particulate are separated before the cleaned air is discharged.
When is an exhaust hood the right choice?
Oil and emulsion aerosols behave differently from ordinary dry dust. They can remain suspended in the air, create deposits on machines and surrounding surfaces and place additional load on ventilation systems. A dedicated mist collector is therefore designed specifically around liquid aerosols, smoke and lubricant contamination rather than conventional dust filtration.
KEY FEATURES
Capture position
Above the process
Main contaminants
Oil mist, emulsion mist and smoke
Installation
Directly on or beside CNC machines
Filtration
Multi-stage mechanical separation
Airflow range
Up to 5,000 m³/h
Maintenance
Tool-free filter access
Installation options
Integrated fan or filter-only configuration
PRODUCT
Oil mist filters in our range
Two product families cover compact machine-mounted filtration and more demanding multi-stage CNC applications.
COMPACT OIL MIST FILTER
FOM
FOM is a stationary oil mist filter designed for direct connection to CNC machines using flexible ducting. The system uses two filtration stages to capture oil mist, emulsion mist, lubricant aerosols and smoke generated during machining. Collected lubricant can either be drained into a collector or returned to the machine, depending on the installation concept.
1,600–3,200 m³/h · two-stage filtration · CNC applications
HIGH-PERFORMANCE CNC MIST COLLECTOR
TECHNOMATIC
Technomatic is designed for demanding CNC machining environments where continuous operation and higher filtration performance are required. The unit uses five filtration stages and can operate for extended periods, including continuous applications of up to 24 hours. It can be installed as a freestanding unit or mounted directly on the machine using dedicated supports.
1,000–5,000 m³/h · five-stage filtration · continuous duty
Not sure whether FOM or Technomatic fits your CNC machine?
Tell us the machine type, enclosure size, coolant or lubricant used and required airflow and we will help select the appropriate mist filtration system.
APPLICATIONS
Where stationary oil mist filters are used
Oil mist filters are primarily used on machining equipment where cutting fluids or lubricants generate airborne liquid aerosols.
WHY TEHNO FILTER OIL MIST FILTERS
Filtration designed around the machine
NEED OIL MIST EXTRACTION?
Tell us which machine you operate, the type of coolant or lubricant used, the enclosure size and how intensively the process runs. Our team will help determine the appropriate filtration stages and airflow capacity.